Welcome! Need support, you got it. Or share your ideas and experiences.
Return to Planar Speaker Asylum
76.7.27.225
In Reply to: RE: Just as a matter of interest ... posted by andyr on November 25, 2021 at 02:44:37
I am currently running full range but would agree that a HP setup would be optimum. I am currently refining the Digital front end of my system but at some point I will explore the response curve in more detail.
I would be interested in recommendations on High Pass setups using LRS's with dual REL's.
Follow Ups:
Be aware you can't implement a HP filter on the LRSs if you use REL's "high-level" connections to the subs.The only way it will work is by feeding the output from your preamp into a 2-way active XO and then feeding:
* the low pass output into the low-level inputs (RCAs) on your subs, and
* the high pass outputs into the amp driving the LRSs.Using something like a miniDSP 2x4HD would allow you to play with different roll-off frequencies, to decide which delivered the best sound; I would suggest you start off at 24dB L-R @ 60Hz.
Andy
Edits: 11/26/21
Thanks for the recommendations and comments.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: