Welcome! Need support, you got it. Or share your ideas and experiences.
Return to Planar Speaker Asylum
75.177.41.135
In Reply to: RE: "there's a deep notch at about 70 Hz" ... posted by andyr on August 27, 2021 at 22:19:07
filled in effectively without causing dangerous amounts of overdrive at the frequency in question, as all the power you pump in just continues to cancel. If they have found a way around this, I'd be interested in knowing.
Mark in NC
"The thought that life could be better is woven indelibly into our hearts and our brains" -Paul Simon
Follow Ups:
You are correct that you can't just boost the 70Hz with a typical PEQ filter. It won't work because you just drive the cancellation deeper while overdriving the amp and speaker.
But ... you may be able to use an all-pass filter at 70Hz and improve the notch. You can do all-pass with a miniDSP 2x4HD. I've had some success with this approach.
But the way the DWM might be able to fill it in is by placing the DWM at a spot in the room where that cancellation does not exist. I use two DWM's this way and they removed cancellations that I had between 100 and 180Hz.
Agilist, Musician, Photographer, Audiophile
Magneplanar: 3.7, CC5, MC1, DWM; Outlaw: UltraX12, LFM-1C; Emotiva: XMC-1, PA-1; Nord: Nord One NC500DM; Outlaw: Model 7500; OPPO 205
Nt.
Mark in NC
"The thought that life could be better is woven indelibly into our hearts and our brains" -Paul Simon
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: