Welcome! Need support, you got it. Or share your ideas and experiences.
Return to Planar Speaker Asylum
135.23.154.28
Went to my storage room to check out a pair of single panels I picked up a few years ago.One is MG-1.6/QR. I will replace the sock and test it. No stand and no frame.
Second is just a black panel and with heavy metal sides. 70" high, 17 3/4" wide. Two sets of wires in it, both show good continuity - low and high panel (one is a wire, the other is metal foil)? Can anyone confirm what speaker that panel came from? MG-20?
Edits: 09/07/20Follow Ups:
that cancels out the MG20...my guess MG1
Edits: 09/07/20
It is a quasi-ribbon mid. I am completely missing the ribbon tweeter.
I guess it is not possible to get another panel from Magnepan?
Roger, probably going to cost too much, and the speakers have been replaced with newer models... I am all but given up with MG-20.1 panel, because it is all I have. You'd need two crossovers, two ribbon tweeters, another panel, stands, etc.
Single MG-1.6/QR that I got... I'll remove and wash (or replace) the sock, but again, I don't think I'll be able to find another 1.6 anywhere. I have been lazily watching classifieds for a couple of years now.
I would be happy with just two MG 20.1 panels without the rest. Active bi or tri amping with an active crossover and some baffles and you are there.
Here is what the connections look like.
After doing a bunch of research and comparisons, this is a low-mid panel from MG-20.1. Push-pull magnets on both sides of low and mid, and very very heavy. Both low and mid show good resistance on the multimeter. Will list it locally, as I have zero use for it.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: