Welcome! Need support, you got it. Or share your ideas and experiences.
Return to Planar Speaker Asylum
24.20.100.228
So, just wondering if any preferred tweeters to use, such as
1" dome type, etc.. If anyone had the SPL/watt spec. on the MG-1's
that would be great too..Also, is the tweeter section 4 ohms also?.
Not interested in OEM replacement kits from Maggie.
Edits: 07/17/20Follow Ups:
Specs for the MG-1 are here:
http://www.integracoustics.com/MUG/MUG/articles/speakers.html
So depending on which version you have, you will be looking for a tweeter that is flat-ish from 1.6k or 2.4k on up. General rule of thumb is to add an octave to a tweeter's stated frequency response (Fs) to avoid any non-linear behaviour at the bottom of the range.
So you'll want a 4 ohm tweeter that with Fs of about 1k, somewhere in the 83db/W/m range. Of course you could adjust some of this with the crossover but that's a whole 'nother can of worms.
This will likely end up being a larger tweeter...
Happy hunting!
Thanks...may end up changing cap to 6-8 mf so I can use 6 or 8 ohm tweeter. Ones that I have on hand.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: