Welcome! Need support, you got it. Or share youe ideas and experiences.
Return to K&K Audio / Lundahl Transformers
99.178.170.55
In Reply to: RE: 1683 can get the secondary 6.3v-0 change to 12.6v-0? posted by dick8052@yahoo.com on January 25, 2017 at 19:11:00
You can connect the two 6.3v windings in series to set 12.6v. Connect B4 to B6 and use B7 and B1 as the two 12.6V leads. The current maximum for this is 3A.
If you are asking if you can have 0-12.6V and 0-6.3V from the LL1683 at the same time, that depends on how you want this. You can get 0-6.3 from B7-B4, but this is shared with the 0-12.6V connection described above, so these two will be at the same potential at B7. If you need a totally separate 0-12.6 and 0-6.3, then it can't be done with the LL1683. For this you would need the LL2758.
Kevin Carter
K&K Audio
www.kandkaudio.com
Follow Ups:
and how can i get the HI-B is 250-0-250
is Connect 15 for 250
Connect 22 to 24 than for 0
Connect 17 for 250?
Prim
115V is L connect 2+12
N connect 4+10
that's right?
and how can i get the HI-B is 250-0-250
is Connect 15 for 250
Connect 22 to 24 than for 0
Connect 17 for 250?
Prim
115V is L connect 2+12
N connect 4+10
that's right?
Good job! You are correct with respect to both.
Kevin Carter
K&K Audio
www.kandkaudio.com
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: