Welcome! Need support, you got it. Or share youe ideas and experiences.
Return to K&K Audio / Lundahl Transformers
99.178.170.55
In Reply to: RE: Phase splitting input transformer for PP RH amp posted by DAK on May 24, 2016 at 09:04:23
OK, I know those designs.
If you choose the LL1544A, the hook-ups are in the datasheet, R4B / R4U for the input side, depending on whether you use balanced or unbalanced sources, and L4B for the output side.
Kevin Carter
K&K Audio
www.kandkaudio.com
Follow Ups:
Ok, thanx Kev. One of my concerns is how to mount the units in my amp . Do you have any instructions or photos showing that? The chassis will have about 1 3/4" in depth to work with. I am also considering a top mounting to show them off. If mounted for viewing, can i get an transformer enclosure to put them in. regards, Dak
You won't need to worry about the size of transformer and where it will fit. Check out the dimensions in the data sheet.
Kevin Carter
K&K Audio
www.kandkaudio.com
.
Double-sided 3M foam tape from the hardware store works great.
Kevin Carter
K&K Audio
www.kandkaudio.com
What kind of hook ups does it have?
Have you looked at the data sheet? The connections are made to pins on one surface of the transformer.
Kevin Carter
K&K Audio
www.kandkaudio.com
Hi i have been looking for a set of pictures but only found some of the top. i will check the data sheet. thank you
Also, as an easy button for the 1544A, Kevin has some relatively inexpensive circuit boards to mount the transformers on standoffs.
,
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: