Welcome! Need support, you got it. Or share youe ideas and experiences.
Return to K&K Audio / Lundahl Transformers
71.210.56.90
Kevin
Are there any transformers in your lineup that could give me SE, ultra-linear
operation @ around 8k with 43% taps? It would be used with a 47 tube so very low wattage.
Cal
Follow Ups:
The closest candidate in a small output is the LL1682/XXmA, which would be 8.8K:8ohms with a 50% tap.
Kevin Carter
K&K Audio
www.kandkaudio.com
Thanks
That should work just fine. Now, how would I configure the connections
to get these results. The pdf doesn't say.
Cal
In the data sheet diagram of the SE connection, use either of the jumper connections between pins 5 and 11 as the UL tap.
Kevin Carter
K&K Audio
www.kandkaudio.com
Thanks Kevin
That should work fine, just out of curiosity what UL percentage would I get
if I used either the 3 pin or the 9 pin as the UL tap.
Cal
about 17%
Kevin Carter
K&K Audio
www.kandkaudio.com
Hi
Wouldn't one tap have a higher ratio than the other?
Doing the math using the turns ratio I get around 17% on one pin
and around 83% on the other. Possibly I am way off here?
Cal
You are correct. I was only quoting the nearest tap to B+.
Kevin Carter
K&K Audio
www.kandkaudio.com
nt
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: