|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
85.144.117.208
In Reply to: RE: Altec 902-8T measuring question posted by Bill Fitzmaurice on January 10, 2021 at 10:14:22
Thanks for your reply Bill.
Should I worry about the difference measured at all? I saw other Altec compression drivers online that had lower DCR measurements hence my worry.
Follow Ups:
The difference in DCR is probably due to the drivers being from different production batches perhaps years apart, or one or both could have replacement voice coils/diaphragms. Their sensitivity won't be exactly the same, but it's not like you'd be mixing 8 ohm and 16 ohm drivers. Other factors that will have much more effect, like Fs and Le, you can only see on am impedance sweep.
Check for corrosion of the cable connector screw contacts and the push on connectors at the diaphragm, i have seen the same dissimilarity on a pair. After cleaning, dc resistance got similiar.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: