|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
68.7.9.132
In Reply to: RE: Just pulled the trigger on some 2420's, 2307's and Kenrick Sound 2308's! posted by Cougar on June 17, 2020 at 19:42:16
JBL Foilcal for the 4345's and some JBL speaker mounting kit hardware. I also ordered some JBL 2405's, this will complete my speaker list of 2245H's, 2123H's which will be made into 2122H's, 2420's, 2307's and 2308 lenses, 2405's super tweeters.
Now I have to finish gathering the Baltic Birch wood which I have half of it already. Then need to decide if I want to make an external Xover (Kenrick style) or internal Xover.
Now the hard part/s begin! :)
Follow Ups:
that's a mighty fine project
I heard those long ago on Mac SS, Revox front end
they were impressive & I guess 'immersive' ... in a 'nice' room
forgive me for not following the thread but what will you drive them with?
regards,
Two Crown power amps, XLS 2502 and XLS 1502 in Bi amp mode. I have seen that this will give better sonic performance due the voltage driving of the lower end drivers. I will also do the Charged Coupled crossovers like JBL did.I do have two other amps for the upper end if the Crown don't do it. I have an Edge M8 amp and my VTA-120 tube amp.
I'm still undecided if I want to do a internal or the external crossover like Kenrick does. Most likely will do the external crossovers.
I know when you do a the Charge Coupled xover you don't really need to use expensive high quality capacitors. I will still probably use the Jantzen Superior Z caps on the upper end part of the Xovers. These are some really nice caps for not too much.
Edits: 06/21/20
I agree on the caps, and I would surely want tubes 'up top' if they mesh well with the system ... I'm actually excited about this project for you, it should be hella cool!
regards,
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: