|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
70.48.184.172
In Reply to: RE: Onken Advise posted by Pro Sound Guy on March 29, 2012 at 11:41:59
Thanks 'Pro Sound Guy' I checked the site and it was a help. But I had a few questions on the design! Mostly my concern is the 'Port' Is this an open port as in a length of tube or a constructed slot? By the looks of the diagram it is closed and the space is part of the total length of the Horn!
The next question: is the 'Angled Throat Piece' is centered equal distance from top front and rear enclosure walls?
Francis
Follow Ups:
I was searching for the TSP's on that JBL driver of yours and I did find
someone posted FS was 80hz on that driver and it had a small xmax distance and one should run a sub with them.
Thats all I have
Good luck on your project
Thanx Pro Sound Guy, I have an ad. paper from the Heritage wesite and it gives the same 80Hz! I may try this TQWT setup and see if it will draw that last low Hz from it.
Francis
Hi, Do you already OWN these drivers, or are you looking for possibilities for them before you buy? If you own them, and there are some audio clubs in your area, see if a member has a WT3 and can test and run some parameters on them for you. This would take some of the guess work out of what they'e capable of and what enclosures you should use.
Thanks gfederys I do own the pair... I have the WT3 also and I have tested it. Do not mean to sound stubborn or dense, but I was just looking for best design for this pair. Thought maybe that the TQWT would yield a better low end then a ported box!
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: