|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
208.120.39.133
In Reply to: RE: EV 15trxb and t25a crossover posted by burlesonlundy@hotmail.com on September 09, 2008 at 14:37:26
I believe the X8 is probably what's already inside the 15trxb, no?
Dave
Follow Ups:
I think the x36 is built in to the speaker and the x8 is for the mid range horn and woofer if you used the model with a separate hf tweeter and crossover. So can i just make a cross over for the mid range horn `or will that mess up the phase or any thing els . remember i am stupid when it comes to cross overs so please speak slow . Thanks AL
Both the X8 and X36 are two-way crossovers, I don't think you'd use either for anything but a two-way system. The X336 is a three-way crossover that possibly could be designed for the use you are describing, but to use it you would definitely remove any other crossover (ie the X36 or whatever's in there).Dave
The original ev stuff was sold as kits and you could add on later and for the 15trxb its said if i wanted to ad the t25s 8hb horn it also needed the x8 crossover along with it this is where all of my confusion is from . It dosnt make sense to me . AL
unless the idea is to not use the coaxial tweeter at all. If you had a better resolution scan of the schematics, you could use the values to reverse-engineer it to figure out what is going on in those two crossovers in case there is some way that using them together makes for the appropriate 3-way. I can't really make out any of the values from the picture above, and I'll defer to those that are more knowledgeable that might have a better answer.
Dave
Is this what you're looking for?
Way too Funny !
Willie
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: