Digital Drive

Re: Bunred CD problem.

65.170.173.19

[ Follow Ups ] [ Post Followup ] [ Thread: Display All Email ] [ Digital Drive ]

Jim N.

(A)

In Reply to: Bunred CD problem. posted by jowook on August 17, 2006 at 10:14:34:

As mentioned before, use Exact Audio Copy (free download) to copy your CD to your hard drive and then burn it to a blank CD-R. Also, you get better results with better media (Taiyo Yuden, Verbatim, Mitsumi) then with the cheaper brands. I believe that Taiyo Yuden and Mitsumi (MAM) are the only ones that still manufacture media in Japan, which has better quality production facilities. You can buy them on-line but avoid E-Bay as there are a lot of counterfeit Taiyo Yuden around. For further assitance with EAC check Hydrogen Audio forum. Good luck!

Follow Ups:

Re: Bunred CD problem. - SatoriGFX 01:21:16 08/18/06 (0)
I assume you mean Mitsui. Great cd-r media.
Adam.
EAC rips but doesn't burn - Frihed89 22:25:08 08/17/06 (7)
Or is there something I don't know? Can I use EAC to burn (how)?
- Re: EAC rips but doesn't burn - Dawnrazor 06:04:37 08/18/06 (6)
  IMHO cds are dead, so I have never used EAC to burn.
  But it does.
  Make sure you have an updated version, and follow these instructions:
  To burn a cuesheet:
  1. Start EAC.
  2. Select Tools | Write CD-R.
  3. Select File | Load CUE Sheet. Specify your cuesheet file.
  4. Click CD-R | Write CD.
  5. The disc will now be burned.
  - Cue Sheet? - Frihed89 06:23:26 08/18/06 (5)
    Thanks. I have all these things. I just don't know how to make a cue sheet. I'll figure it out.
    - See my reply in the computer audio forum (nt) - andy_c 12:13:09 08/18/06 (0)
      nt
    - Try this site - Mark Tinordi 06:26:13 08/18/06 (3)
      http://www.stutenandy.de/cue.php?lang=en
      - Actually - Mark Tinordi 06:31:11 08/18/06 (2)
        
        In Reply to: Try this site posted by Mark Tinordi on August 18, 2006 at 06:26:13:
        
        You need to know the minutes:seconds:frames to use that.
        An easier way to get a CUE sheet:
        The long way -- load all the WAVs in Audacity and string them all together (cut track 2, select track 1 and press "end" to go precisely to the end of the track, and paste track 2 onto it). After pasting each track, make a note of the m:s:f (you have to go View > Set Selection Format > cdda min:sec:frames 75fps). Once you have this information, put it all into the CUE generator. I've found that you have to manually edit the sheets it makes, too: open the CUE in Notepad and change all of the "INDEX 00" to "INDEX 01". Now you're ready to burn.
        The short way -- just rip the disc in EAC with the "image and CUE". Instant WAV file and CUE for it.
        
        OK. I have a Ph.D. You have to get down to my level! - Frihed89 08:32:48 08/18/06 (1)
        
        In Reply to: Actually posted by Mark Tinordi on August 18, 2006 at 06:31:11:
        
        First. Thanks for taking the time. I see this image and cue button on the left side of the screen, with "IMG" above it. That's it? What do I do next? If you ever come to DK, i'll buy you a burger! Thanks again.
        
        if you create the exact duplicate - porky_pig_jr 11:51:54 08/19/06 (0)
        
        In Reply to: OK. I have a Ph.D. You have to get down to my level! posted by Frihed89 on August 18, 2006 at 08:32:48:
        
        with EAC, the simplest thing to generate a CUE file for the whole CD is from the toolbox, don't remember which particular one, but try pull down menus, you'll find the option "Generate CUE Sheet". Do it. It will create a file with an extension ".CUE", you'll have to give it a name. Then to burn the CD, load the CUE sheet, and start burning.

This post is made possible by the generous support of people like you and our sponsors:

Schiit Audio

You can not post to an archived thread.