|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
94.140.8.147
In Reply to: RE: Dedicated Power Line Advice posted by jea48 on September 20, 2024 at 07:22:43
"Not possible in the USA to feed Audio equipment."
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Really well in Southfield Mich, USA it was possible in the 90's and apparently still is possible.As far as feeding Audio equipment, well its a plug on the wall, they won't ask or care what you plug into it with...
https://www.dteenergy.com/us/en/quicklinks/builders/builders-electric/electric-service.htmlNew Meter, New Service, New Install.
Steps for Installation1. Contact Us at (800) 338-0178
Make sure to call us early in the planning stages so we can assess your needs and determine costs. For some customers, we may need to extend higher voltage power lines, which requires additional time.
Residential customers, please have the following information available:
Your full name
Telephone number
Service address and major cross streets
City or township
DTE Energy account number (If you need access to your online account, please sign in or create an online account.)
Commercial customers, please have this additional information available:DTE load sheet
Riser diagram
Proof of Ownership
Legal description of property
2. ConsultationOne of our representatives will contact you to schedule a consultation to review the details of the job. If you're considering future exterior modification plans such as a swimming pool, deck or patio, please mention these during your call.
3. Site Visit
We will perform a site visit to discuss the scope of the job. Please ensure the site is accessible and remove obstacles for proper assessments of equipment and work involved.
After a service route is determined, please clearly identify and expose ALL private utilities such as sprinkler or septic systems. It's a good idea to call MISS DIG at 8-1-1 to mark any known underground lines.
DTE will not be held responsible for damage to private utilities not clearly staked by the customer.
4. Dig Your Own Trench (Optional)
During the consultation process, our representative will discuss how you can reduce costs by digging your own trench.
If you decide to dig your trench, it will help you reduce installation costs but add more steps to the process. Our representative will provide guidelines for digging your trench and help you determine the appropriate route.
Note: Before digging, you will need to identify the location of existing underground utilities. MISS DIG is the specialized central clearinghouse for this service, processing requests to locate and stake most underground public utility services. Call 811 for more information.
Please note, we do not do any landscape restoration.
4. During Construction, Know Your Service Options
We will help you choose the best service option to meet your immediate needs.
Our representative will determine the location of the building service and meter equipment.
If facilities are available, we can provide temporary electric service and a pre-construction meter mount may be installed.
5. Municipal InspectionMunicipalities require inspections of electrical installations. Check with your municipality for guidelines. The inspector will verify the installation meets the National Electrical Code and the municipality's local ordinance standards.
6. Final Inspection
When your municipality approves your meter box installation, we will inspect the installation to make sure our standards are met for your safety and service. We will take final measurements as needed.
We will also verify a city inspection is complete through validation of the approval sticker or confirmation provided by the city inspector.
7. Final Documentation
We will send a Contract Agreement for you to complete and return along with payment.* Additional documents are sent if necessary. The process will not move forward until all paperwork is submitted. Please be sure to provide us with your current mailing address and email to send documentation and avoid delays.
There is a whole forum [Michigan Sportsman] with threads of people in MI talking about getting new service installed. I think they would also be surprised to learn its not possible.
https://www.michigan-sportsman.com/threads/consumers-energy-cost-to-run-new-service.715333/
J.
Edits: 09/20/24 09/20/24 09/20/24Follow Ups:
I misunderstood what you posted in your previous post.You said:
"I went a small step further and contacted my electrical company to install a separate 220v line to my house. It cost me around $600US, from there I had an electrician install a new breaker box for the 220v line and move the lines that feed my room to the new service."to the new service.
I took it you had a second, dedicated, electrical service installed at your home for your audio equipment. Therein two electrical services at your house.
I looked at your profile and it says you live in Japan. Thus my response "Not possible in the USA to feed Audio equipment". Japan may allow more that one service to a house...
Here is what I based my response on in my previous post.
2020 NEC ARTICLE 230 Services (Same for the 1990 NEC code).2020 NEC
230.2 Number of Services. A building or other structure served shall be supplied by only one service unless permitted in 230.2(A) through D.Nothing in 230(A) through D would warrant an additional electrical service.
FWIW the AHJ (Authority Having Jurisdiction) in your State, County, or City has the Final say. BUT with that said IF the Utility Power Company strictly follows the NEC they can refuse a hook up for a second electrical service on the building,.. house in this case.
My apologizes...
Edits: 09/20/24 09/20/24 09/20/24
I did have two electrical services at my house...this was in the 90's. However it appears that at least in Michigan having more than one service is still allowed. Either way, you will have to contact your local electrical municipality to inquire about having an additional line.My home actually had TWO meters. In Michigan it was no problem, many many people had two lines to their property, especially up North where people had barns with power equipment and such. I was hardly an oddity.
BTW, yes I'm in Japan now, I have no idea if they allow two services here or not, but I don't need it.
J.
Edits: 09/20/24
@ Jotaro, thanks for sharing.NEC authority/enforcement comes from the States governing bodies that pass Laws and Ordinances. They can adopt all or part of NEC. Delete what they don't like and add or rewrite what they want.
I looked up what appears to be the Michigan Electrical Code. Appears? The State can amend, delete, the NEC and write their own code. The State may allow cities to amend the code with the State's permission.
Here is what I found for the 2023 Michigan Electrical Code.
Quote:
" The Michigan Electrical Code 2023 is based on the NFPA 70, 2023 with amendments and additions. " And there it is...
https://up.codes/viewer/michigan/nfpa-70-2023/chapter/2/wiring-and-protection#230Jim
Edits: 09/20/24
Thanks for going through all the trouble Jim.You put quality effort into making your point, presenting documents and the like. However, I think this has gone on a tangent having dialog as to the validity of past events.
As for me, its water under the bridge, events that happened decades in the past and are not likely to repeat. This is to say, my interests in this subject are limited to presenting options to the OP not defending past events or possible future events that I'll take no part in.
What the OP should take from this dialog is, a possibility exists to resolve an issue, if pursued time and effort will need to be spent contacting their local municipality to explore the option.
J.
Edits: 09/20/24
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: