|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
69.255.103.222
In Reply to: RE: Review: Connex "The Natural One" posted by Rocket_Powered on April 06, 2021 at 07:51:58
To use the cable unshielded, you leave the shield unconnected at BOTH ends. I cut the shield braid as close to the outer housing as possible and then wrapped it with electrical tape a couple times to prevent any remaining strands of the shield from touching the conductors.
Follow Ups:
Thanks for clarification. For the shielded version, you normally wouldn't connect the shield to ground at the input end RCA plug no?
I was also going to ask about comparisons to the Duelund wire, as both are tin plated copper strands.
For the shielded version, you connect the shield to ground at one end only. That is usually considered the input end but the cable will work fine in either direction.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: