|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
172.220.61.59
In Reply to: RE: Is 16 gauge speaker wite ok to use with my Merlin TSMBME posted by Duster on July 04, 2020 at 16:51:54
can you narrow this down & address the impedance issue of wire gauge from his 60W tube amplifiers with low damping being part of the reflected load it will 'see' in tandem with his Merlins? I believe that is the feedback the OP seeks.
I'm thinking that the heavier the gauge he can use in the 8' runs he referenced the better the overall synergy of speaker + cabling + OPT
your thoughts?
regards,
Follow Ups:
The OPs system involves both tube and solid state power amplification to choose from.
I would suggest Furez FZ124AS 12/4 bulk cable wired cross-connected with a star quad geometry if he just wants to choose an inexpensive option.
The Furez FZ124AS features a foamed/cellular dielectric and the stranded conductor features a coarser gauge core which affects both cable resonances and provides a firmer conductor bundle while still remaining very flexible, IMO.
It's the best inexpensive stranded speaker cable I've experienced.
See link:
sounds reasonable to me ...
regards,
Me too rv. 2x12AWG= 9AWG
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." Tweaker456
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: