|
Vinyl Asylum: RE: EAT Turntables by astock Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
For Sale Ads |
68.83.236.65
In Reply to: EAT Turntables posted by rrsands on December 28, 2016 at 08:00:24:
I recently purchased an E-Flat. It is a well engineered and beautifully appointed turntable. Simple to assemble, particularly mounting and positioning the cartridge on the tonearm. Its uni-pivot design is easier to handle than others I have addressed in the past. I have no concerns regarding the geometry of the arm, or about its length to height ratio. Apparently, no one will have an issue about its width to length ratio, except that it interferes with the last step in a Feickert protractor set-up routine. I can think of other arms that are far more 'adventurous' along these lines - Funk, WTL, Reed - where this aspect of their design was gladly accepted. Rotational accuracy appears to be dead on and it was the first audible quality that I noticed as compared to my previous table. I had thought that really good was good enough, until I heard the difference. If considering something new I would take the time and check it out. The E-Flat is far from their most expensive table, maybe just as far up the line that Audio Advisor chooses to carry.
This post is made possible by the generous support of people like you and our sponsors:
Topic - EAT Turntables - rrsands 08:00:24 12/28/16 ( 14)
- RE: EAT Turntables - astock 12/29/16 07:17:12 12/29/16 ( 0)
RE: EAT Turntables - PAR 10:34:03 12/28/16 ( 3)
- Isn't that the same factory that also makes Music Hall? - MannyE 12:05:24 12/28/16 ( 2)
- Yup; that's the one. /nm/ - tketcham 05:55:11 12/29/16 ( 0)
- RE: Isn't that the same factory that also makes Music Hall? - PAR 15:15:17 12/28/16 ( 0)
Good deal on the cart - MannyE 10:32:58 12/28/16 ( 1)
- ...AND a $500 Okki Nokki RCM thrown in... - Marc Bratton 11:40:52 12/28/16 ( 0)
RE: EAT Turntables - Marc Bratton 10:17:52 12/28/16 ( 0)
Flat tonearm - dee eye why 09:23:13 12/28/16 ( 0)
Interesting... - John Elison 08:37:02 12/28/16 ( 4)
- RE: Interesting... - rrsands 12:32:04 12/28/16 ( 3)
- RE: Interesting... - John Elison 13:12:54 12/28/16 ( 2)
- RE: Interesting... - rrsands 14:06:30 12/31/16 ( 1)
- RE: Interesting... - John Elison 19:52:15 01/1/17 ( 0)