Tweakers' Asylum: RE: How do I install Duelund PIO capacitors in Audio note dac by mattzack Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

For Sale Ads FAQ / News / Events

Posted by mattzack (A ) on April 29, 2015 at 22:52:35

In Reply to: RE: How do I install Duelund PIO capacitors in Audio note dac posted by Awe-d-o-file on April 28, 2015 at 14:04:01:

Thanks folks.
I tried a couple of things.

First, I soldered some very thin wire through the hole, tinned them up along with the thick copper leads from the Duelund, soldered them all together and kept the caps loose, dangling in mid air. Listened to them and was very impressed with the improved SQ... but only had to secure the caps.

Then, I disassembled what I had just done. I took 2 of those 1 inch square, peel off and stick on things that allow you to run a tie wrap through them. I added some shrink wrap over the cap leads, and just soldered them over the hole instead of through them.

Funny thing is, the SQ does not seem as good as it did then I used the thin wire and had the caps dangling. Not as much air in the highs. I think that it may be because the cap has not had a chance to burn in. I am going to keep it as is for now, but I may go back to the thin wire and dangling cap again, if I don't get the SQ as good as I heard it.

Hey, thanks again folks.

This post is made possible by the generous support of people like you and our sponsors:

The Cable Cooker

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---