 
|
Tweakers' Asylum: Tried those by Chris_F Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
For Sale Ads |
|
|
Tweakers' Asylum: Tried those by Chris_F Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
For Sale Ads |
129.86.240.204
In Reply to: Weaver's ST design ribbon ICs for starters posted by bartc on June 6, 2006 at 20:19:31:
I've tried those cables. They were good but BRIGHT!!! In all though MUCH better than many other more expensive cables (although I'll never give up my Jon Risch Beldens now that I've made that switch).I do have all the stuff to make them again, but they're far to delicate. Perhaps there's something I'm missing in the design, but mine kept breaking. The magnet wire is just far too flimsy and any sort of tension snaps them like twigs. Really, I was having a difficult time soldering the ends and then getting the cables upstairs to my stereo and plugged in before the wire would break. I couldn't unplug them without breaking at least one of the wires. I just need something more reliable. I tried attaching the "jacket" (3M tape) to the RCA to take the load with only moderate success. I couldn't really find a way to attach them firmly and provide strain relief.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Looking for super cheap DIY interconnect - Chris_F 14:04:46 06/5/06 ( 15)
- Interconnect cable, huh? CABLE, huh? Why didn't you post this in the Cable Asylum? (NT) - jeffreybehr 13:39:26 06/12/06 ( 0)
Use Mogami microphone cable and Canare F10's. - orpheus 13:27:56 06/12/06 ( 0)
Re: Looking for super cheap DIY interconnect - Duster 16:51:00 06/6/06 ( 0)
Try here... - C.B. 07:07:54 06/6/06 ( 0)
Super cheap DIY interconnect - DaveT 16:41:43 06/5/06 ( 10)
- Re: Super cheap DIY interconnect - JANDG 05:40:25 06/6/06 ( 1)
- Re: Non teflon cat5 - chris_w 13:33:49 06/6/06 ( 0)
Re: Super cheap DIY interconnect - Chris_F 04:09:12 06/6/06 ( 0)
Re: Super cheap DIY interconnect - zanash 00:22:58 06/6/06 ( 6)
- Magnet Wire - Chris_F 04:08:00 06/6/06 ( 5)
- Weaver's ST design ribbon ICs for starters - bartc 20:19:31 06/6/06 ( 4)
- Tried those - Chris_F 06/7/06 04:12:46 06/7/06 ( 1)
- Re: Tried those - bartc 05:50:14 06/7/06 ( 0)
- Hear, hear! - TopPop 00:10:09 06/7/06 ( 1)
- Re: Hear, hear! - zanash 01:38:09 06/7/06 ( 0)
[Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]
