|
Tube DIY Asylum: RE: But, isn't there a consequence to too much capacitance? (n/t) by Stephen R Do It Yourself (DIY) paradise for tube and SET project builders. |
For Sale Ads |
79.67.108.155
In Reply to: RE: But, isn't there a consequence to too much capacitance? (n/t) posted by pushpulltriode on November 14, 2019 at 20:46:31:
I like a lot of it but reckon it could be a bit better. The eq could be lower Z. Increase caps by 10 lower resistors by 10 roughly and tweak a bit.
But note, it's no expense spared design in his own words so very expensive. I'd also add more iron to the supply and a few other things but that's only IMHO.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Hiraga - SuperB 21:40:31 11/13/19 ( 28)
- I built it. - Salectric 11:15:37 11/15/19 ( 11)
- I had a Trevor Lees modified Radford STA25 here for a while, and an STA15, AND the Radford 22 pre-amp - Timbo in Oz 16:05:35 11/17/19 ( 10)
- Trevor Lees - Salectric 05:43:27 11/18/19 ( 9)
- No more email, Salectric? - 1973shovel 11:03:30 11/20/19 ( 4)
- RE: No more email, Salectric? - Salectric 11:38:04 11/20/19 ( 3)
- Apparently your setting change didn't take - 1973shovel 07:43:30 11/21/19 ( 1)
- I sent you a pm. NT - Salectric 09:10:26 11/21/19 ( 0)
- Thanks, but... - 1973shovel 12:27:21 11/20/19 ( 0)
- The shop's name is in business, whether Trev is still around, I don't see. - Timbo in Oz 18:26:37 11/18/19 ( 3)
- Amen, to that! - FenderLover 19:08:06 11/18/19 ( 2)
- RE: Amen, to that! - Story 03:21:56 11/19/19 ( 1)
- I fixed a Showman Reverb once... - FenderLover 06:35:57 11/19/19 ( 0)
RE: Hiraga - Stephen R 23:26:29 11/13/19 ( 15)
- Question. - FenderLover 05:48:50 11/14/19 ( 14)
- Yeah, there is some 'past ratings' going on there - PakProtector 08:07:33 11/18/19 ( 2)
- RE: Yeah, there is some 'past ratings' going on there - Stephen R 13:22:47 11/18/19 ( 1)
- RE: Yeah, there is some 'past ratings' going on there - PakProtector 17:57:59 11/18/19 ( 0)
- RE: Question. - Stephen R 06:16:46 11/14/19 ( 10)
- But, isn't there a consequence to too much capacitance? (n/t) - FenderLover 06:26:19 11/14/19 ( 9)
- RE: But, isn't there a consequence to too much capacitance? (n/t) - Tre' 12:58:49 11/28/19 ( 0)
- RE: But, isn't there a consequence to too much capacitance? (n/t) - Stephen R 06:37:11 11/14/19 ( 7)
- RE: But, isn't there a consequence to too much capacitance? (n/t) - pushpulltriode 20:46:31 11/14/19 ( 6)
- In a PSU you want minimal ripple for a Phono stage PSU you need to nail it down - Timbo in Oz 18:34:32 11/18/19 ( 0)
- RE: But, isn't there a consequence to too much capacitance? (n/t) - Stephen R 11/15/19 00:05:44 11/15/19 ( 4)
- "Very expensive" + Highly susceptible to external fields - Triode_Kingdom 13:18:13 11/15/19 ( 3)
- RE: "Very expensive" + Highly susceptible to external fields - TomWh 07:14:35 11/16/19 ( 2)
- I've had several valve and SS phono stages. ALL the valve ones were figured out with my techie. - Timbo in Oz 00:38:50 11/17/19 ( 1)
- +1 - All the above (nt) - Triode_Kingdom 09:27:56 11/17/19 ( 0)