|
Tube DIY Asylum: RE: Plate choke, grid choke and speaker woofer pop at switching off the amp by Maciek P Do It Yourself (DIY) paradise for tube and SET project builders. |
For Sale Ads |
208.100.40.48
In Reply to: Plate choke, grid choke and speaker woofer pop at switching off the amp posted by Maciek P on January 27, 2014 at 01:54:01:
Ok.
I changed the secondary of driver transformer with no change
I changed two chokes to 100ohm resistors with no change
I put 10nF in series with 10k ohm on each choke with no change
I changed first 22uF film cap to 1.5uF film cap with no change
Is it an eml20b problem? It is the same in both monoblocks
I had it with 1084 it adj regulated heater and the same with tentlabs modules.
Any idea?
No problem with end tube only
No problem with disconnected coupling cap. I even change coupling cap with no influance
Confusing....
This post is made possible by the generous support of people like you and our sponsors:
Topic - Plate choke, grid choke and speaker woofer pop at switching off the amp - Maciek P 01:54:01 01/27/14 ( 5)
- RE: Plate choke, grid choke and speaker woofer pop at switching off the amp - Maciek P 01/27/14 09:38:52 01/27/14 ( 0)
RE: Plate choke, grid choke and speaker woofer pop at switching off the amp - lovetube 04:51:17 01/27/14 ( 1)
- RE: Plate choke, grid choke and speaker woofer pop at switching off the amp - Maciek P 05:09:38 01/27/14 ( 0)
RE: Plate choke, grid choke and speaker woofer pop at switching off the amp - Maciek P 03:34:44 01/27/14 ( 0)
RE: Plate choke, grid choke and speaker woofer pop at switching off the amp - Maciek P 02:29:13 01/27/14 ( 0)