|
Speaker Asylum: RE: low and high pass settings for KEF LS50s by 2-ears General speaker questions for audio and home theater. |
For Sale Ads |
172.251.83.219
In Reply to: low and high pass settings for KEF LS50s posted by dbphd on September 15, 2021 at 11:02:51:
I had the powered version of the LS50s. I assume the drivers are the same. You should be okay with the Kefs to below 50Hz +/- 3dB. According to Kef, you should start with a high pass filter setting of 70Hz. The KC62s rolloff at 24dB per octave above the low pass filter setting. So start with a low pass setting of 40-45 Hz. Then tweak the settings to your liking.
This post is made possible by the generous support of people like you and our sponsors:
Topic - low and high pass settings for KEF LS50s - dbphd 11:02:51 09/15/21 ( 7)
- RE: low and high pass settings for KEF LS50s - 2-ears 09/16/21 12:10:17 09/16/21 ( 1)
- RE: low and high pass settings for KEF LS50s - dbphd 10:51:55 09/17/21 ( 0)
The KC62 is easy to set up by ear.... - Tromatic 13:29:19 09/15/21 ( 0)
RE: low and high pass settings for KEF LS50s - PAR 12:01:48 09/15/21 ( 3)
- RE: low and high pass settings for KEF LS50s - dbphd 02:26:52 09/16/21 ( 0)
Agree - E-Stat 16:18:31 09/15/21 ( 0)
RE: low and high pass settings for KEF LS50s - pictureguy 14:47:40 09/15/21 ( 0)