|
Amp/Preamp Asylum: Re: Can I Drive Polk SDA-2A's With 2 Bridged Rotel 1070's? by dorokusai Looking for a new Amp or Preamp? If you're after tubes, post over here. |
For Sale Ads |
68.48.53.212
In Reply to: Can I Drive Polk SDA-2A's With 2 Bridged Rotel 1070's? posted by joeychitwood on June 16, 2004 at 09:10:26:
The Polk Audio SDA-2A is 4ohm. The SDA-2B is 6ohm.If you run a non-common ground amplifier with SDA's, you will need to use or manufacture the AI-1 interface. Polk Audio no longer sells the AI-1 interface, but directions for building your own are available, and it can be made pretty cheap. The standard SDA interconnect cannot be used in this situation.
I think you would be pushing the limits of the amplifiers at bridged mode, even though the Rotel is a very capable amplifier. I echo what was said previously, in that it may be time to look for another more powerful 2CH amplifier.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Can I Drive Polk SDA-2A's With 2 Bridged Rotel 1070's? - joeychitwood 09:10:26 06/16/04 ( 3)
- Re: Can I Drive Polk SDA-2A's With 2 Bridged Rotel 1070's? - dorokusai 06/17/04 07:54:31 06/17/04 ( 0)
Re: Can I Drive Polk SDA-2A's With 2 Bridged Rotel 1070's? - clbeanz 12:43:12 06/16/04 ( 0)
Re: Can I Drive Polk SDA-2A's With 2 Bridged Rotel 1070's? - setter 09:55:49 06/16/04 ( 0)