|
Amp/Preamp Asylum: RE: Use a thin hard rubber pad.. Raise it maybe 1/8 to 1/4"?? by MWE Looking for a new Amp or Preamp? If you're after tubes, post over here. |
For Sale Ads |
71.49.57.38
In Reply to: Use a thin hard rubber pad.. Raise it maybe 1/8 to 1/4"?? posted by 3+4=5 on April 21, 2017 at 11:42:18:
Tried that, but it didn't work. Only way to get significantly reduced noise was to raise it several inches, or rotate it in its usual spot, leads fortunately permitting. As it stands, it's not dead quiet but very tolerable, much better than before. Also, radiating from large Maggies, the noise that's left is somewhat "diffused" so is less noticeable. Thanks for the suggestion, though. It was just really gratifying solving this problem on my own.
Mark in NC
This post is made possible by the generous support of people like you and our sponsors:
Topic - Rogue Perseus noisiness- DIY fixed! (mostly) - MWE 12:50:20 04/19/17 ( 14)
- RE: Rogue Perseus noisiness- DIY fixed! (mostly) - duck decoy 07:11:52 04/23/17 ( 0)
Use a thin hard rubber pad.. Raise it maybe 1/8 to 1/4"?? - 3+4=5 11:42:18 04/21/17 ( 2)
- RE: Use a thin hard rubber pad.. Raise it maybe 1/8 to 1/4"?? - MWE 04/21/17 12:13:06 04/21/17 ( 1)
- A strip of metal (copper or mu metal) separating the transformer from the rest of interior. - 3+4=5 20:32:54 04/21/17 ( 0)
RE: Rogue Perseus noisiness- DIY fixed! (mostly) - Ugly 11:51:03 04/20/17 ( 3)
- RE: Shielding w/ mu-metal... - MWE 17:23:22 04/20/17 ( 2)
- RE: Shielding w/ mu-metal... - Ugly 20:24:39 04/20/17 ( 1)
- Will try this. Ought to be interesting. nt. - MWE 20:55:10 04/20/17 ( 0)
RE: Rogue Perseus noisiness- DIY fixed! (mostly) - 6bq5 20:23:21 04/19/17 ( 0)
Why did you assume the factory would not be helpful?? - JoshT 18:38:39 04/19/17 ( 4)
- Well, two reasons, really... - MWE 19:02:57 04/19/17 ( 3)
- Speaking of Conrad Johnson Service Dept. - Robert J 04:55:18 04/21/17 ( 2)
- Ouch!! nt. - MWE 07:21:19 04/21/17 ( 0)
- RE: Speaking of Conrad Johnson Service Dept. - AbeCollins 06:59:41 04/21/17 ( 0)