|
Vinyl Asylum: Re: I don't think so by Bruce from DC Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
For Sale Ads |
207.91.86.2
In Reply to: I don't think so posted by Mark Kelly on February 24, 2007 at 23:24:33:
I don't think so, either. It's hard to imagine that running the motor at 84 volts instead of 120 something is going to produce the sonic effects that I experienced.To the extent that the motor runs more smoothly with the lower voltage (more gentle torque pulses as each pole is passed), it's hard to imagine that what difference there is in smoothness isn't absorbed by the rubber drive belt, which must be a tiny bit elastic.
This post is made possible by the generous support of people like you and our sponsors:
Topic - REVIEW: VPI Industries SDS Accessory - Bruce from DC 19:11:48 02/24/07 ( 31)
- VPI Industries SDS Accessory - qualityman 12:29:07 02/26/07 ( 1)
- you never give up - Bruce from DC 11:39:29 02/28/07 ( 0)
I thought mine was absolutely essential ... - Dave Pogue 08:42:39 02/25/07 ( 1)
- Re: I thought mine was absolutely essential ... - Bruce from DC 14:54:38 02/25/07 ( 0)
VPI Industries SDS Accessory - qualityman 02:27:52 02/25/07 ( 4)
- joke, right? n/t - goheelz 18:28:33 02/25/07 ( 0)
Re: VPI Industries SDS Accessory - Bruce from DC 14:48:42 02/25/07 ( 0)
Why is that so, pray tell? (nt) - Lew 08:20:38 02/25/07 ( 1)
- Because it is ok to spill beer on it. LOL (nt) - mosin 09:10:30 02/25/07 ( 0)
VPI Industries SDS Accessory - Elmo 01:25:43 02/25/07 ( 0)
VPI Industries SDS Accessory - Dave Garretson 00:02:03 02/25/07 ( 1)
- Re: VPI Industries SDS Accessory - Bruce from DC 14:46:20 02/25/07 ( 0)
Run voltage is adjustable. - powermatic 21:11:21 02/24/07 ( 0)
VPI Industries SDS Accessory - hahax@verizon.net 20:11:32 02/24/07 ( 12)
- Actually, the SDS is not about frequency control at all... - Ray-o-Stat 22:55:55 02/24/07 ( 11)
- I don't think so - Mark Kelly 23:24:33 02/24/07 ( 10)
- Re: I don't think so - Bruce from DC 02/25/07 15:06:02 02/25/07 ( 9)
- Well, if that is the case, then the audible results simply don't add up... - Ray-o-Stat 19:16:41 02/25/07 ( 8)
- Oh.....I just checked your system - Paul Tobin 05:21:06 02/26/07 ( 6)
- Answers... - Ray-o-Stat 09:29:13 02/26/07 ( 5)
- I guess you mean lower frequency? - Paul Tobin 14:15:42 02/26/07 ( 1)
- Higher frequency/lower voltage is what I mean. /mt - Ray-o-Stat 16:28:42 02/26/07 ( 0)
- that's weird - Bruce from DC 13:40:18 02/26/07 ( 2)
- In case you are not familiar with the operation of the SDS... - Ray-o-Stat 16:32:13 02/26/07 ( 1)
- I am. (nt) - Bruce from DC 11:17:32 02/28/07 ( 0)
- Ray - are you saying you get the same speeds at those two settings??? - Paul Tobin 05:02:48 02/26/07 ( 0)
Re your list of system components, I hate to tell you this, but.... - Lew 19:34:32 02/24/07 ( 4)
- Re: Re your list of system components, I hate to tell you this, but.... - sberger 20:22:02 02/24/07 ( 0)
smack me upside the head!! (review supplmented) - Bruce from DC 19:38:03 02/24/07 ( 2)
- Re: smack me upside the head!! (review supplmented) - Lew 08:16:10 02/25/07 ( 1)
- just FTR, the BAT VK-300se is an (hybrid) integrated amp - Bruce from DC 15:02:51 02/25/07 ( 0)