|
Tube DIY Asylum: RE: "Singing" Power Transformer by mikeyb Do It Yourself (DIY) paradise for tube and SET project builders. |
For Sale Ads |
97.94.49.170
In Reply to: RE: "Singing" Power Transformer posted by trobbins on October 13, 2019 at 18:18:57:
The heater-cathode voltage limit of the 6CA4 is 500 volts. T1 secondary is 350-0-350 VAC, so the cathode voltage is around 300 VDC with the LCLC filter. Why do you say that the heater-cathode voltage has been exceeded?
Dunacn amps "PSU Designer II" shows no problems.
This post is made possible by the generous support of people like you and our sponsors:
Topic - "Singing" Power Transformer - mikeyb 07:35:48 10/11/19 ( 18)
- RE: "Singing" Power Transformer - FenderLover 07:01:35 10/13/19 ( 0)
RE: "Singing" Power Transformer - trobbins 03:18:25 10/13/19 ( 6)
- RE: "Singing" Power Transformer - mikeyb 11:37:10 10/13/19 ( 5)
- RE: "Singing" Power Transformer - trobbins 18:18:57 10/13/19 ( 4)
- RE: "Singing" Power Transformer - mikeyb 10/14/19 09:57:46 10/14/19 ( 3)
- RE: "Singing" Power Transformer - trobbins 16:28:16 10/14/19 ( 2)
- RE: "Singing" Power Transformer - mikeyb 18:55:21 10/14/19 ( 1)
- RE: "Singing" Power Transformer - trobbins 22:17:39 10/14/19 ( 0)
Can you feel the vibrations on the laminations... - FenderLover 18:47:37 10/11/19 ( 4)
- RE: Can you feel the vibrations on the laminations... - mikeyb 20:02:44 10/11/19 ( 3)
- "Holding the transformer's hosing stops the noise.Holding the transformer's hosing stops the noise." Bingo! - Chip647 20:48:59 10/11/19 ( 2)
- RE: "Holding the transformer's hosing stops the noise.Holding the transformer's hosing stops the noise." Bingo! - mikeyb 07:36:53 10/12/19 ( 0)
- Rubber Washers - Triode_Kingdom 01:46:30 10/12/19 ( 0)
RE: "Singing" Power Transformer - Triode_Kingdom 16:55:52 10/11/19 ( 1)
- RE: "Singing" Power Transformer - mikeyb 17:31:47 10/11/19 ( 0)
Yes. Tighten down the bolts securing the end bells. - Ralph 12:20:59 10/11/19 ( 0)
did it always sing? - elblanco 09:44:20 10/11/19 ( 1)
- RE: did it always sing? - mikeyb 16:45:16 10/11/19 ( 0)