|
Tube DIY Asylum: Re: C3g as driver for 300b by Paul Barker Do It Yourself (DIY) paradise for tube and SET project builders. |
For Sale Ads |
88.108.8.229
In Reply to: Re: C3g as driver for 300b posted by IslandPink on June 19, 2006 at 14:14:21:
Sorry Mark your splitting hairs.It is well known you get the best from pentodes by looking at the curves on their side, and using low load resistor to keep the loadline away from the knee. That's what I was refering to, I knew this long before you built your first amp. Don't get too big for your boots.
This post is made possible by the generous support of people like you and our sponsors:
Topic - C3g as driver for 300b - horny 14:37:49 06/18/06 ( 13)
- Re: C3g as driver for 300b - Thorsten 02:42:25 06/19/06 ( 5)
- Re: C3g as driver for 300b - horny 09:33:55 06/19/06 ( 4)
- Re: C3g as driver for 300b - Thorsten 09:45:05 06/19/06 ( 3)
- Re: C3g as driver for 300b - horny 10:16:44 06/19/06 ( 2)
- Re: C3g as driver for 300b - Thorsten 10:25:16 06/19/06 ( 1)
- Re: C3g as driver for 300b - horny 11:35:39 06/19/06 ( 0)
Re: C3g as driver for 300b - berlin 15:19:31 06/18/06 ( 6)
- Re: C3g as driver for 300b - horny 15:30:39 06/18/06 ( 5)
- Re: C3g as driver for 300b - Paul Barker 21:47:27 06/18/06 ( 4)
- Re: C3g as driver for 300b - IslandPink 14:14:21 06/19/06 ( 2)
- Re: C3g as driver for 300b - Thorsten 16:02:36 06/19/06 ( 0)
- Re: C3g as driver for 300b - Paul Barker 06/19/06 14:24:21 06/19/06 ( 0)
- Where`s connected G3... - RM 07:08:24 06/19/06 ( 0)