|
Tube DIY Asylum: Re: C3g as driver for 300b by horny Do It Yourself (DIY) paradise for tube and SET project builders. |
For Sale Ads |
84.28.64.63
In Reply to: Re: C3g as driver for 300b posted by Thorsten on June 19, 2006 at 02:42:25:
hi Thorsten
thanks you very much for the very detailed information
i will try an ccs then
but how much current must the c3g draw?
i have 2 ccs printcarts from Machmat.com
but they must set on the right currentthe powerstage is already finisht it is a fixed bias stage
i wil do 400 volt on the anode and 80ma current
This post is made possible by the generous support of people like you and our sponsors:
Topic - C3g as driver for 300b - horny 14:37:49 06/18/06 ( 13)
- Re: C3g as driver for 300b - Thorsten 02:42:25 06/19/06 ( 5)
- Re: C3g as driver for 300b - horny 06/19/06 09:33:55 06/19/06 ( 4)
- Re: C3g as driver for 300b - Thorsten 09:45:05 06/19/06 ( 3)
- Re: C3g as driver for 300b - horny 10:16:44 06/19/06 ( 2)
- Re: C3g as driver for 300b - Thorsten 10:25:16 06/19/06 ( 1)
- Re: C3g as driver for 300b - horny 11:35:39 06/19/06 ( 0)
Re: C3g as driver for 300b - berlin 15:19:31 06/18/06 ( 6)
- Re: C3g as driver for 300b - horny 15:30:39 06/18/06 ( 5)
- Re: C3g as driver for 300b - Paul Barker 21:47:27 06/18/06 ( 4)
- Re: C3g as driver for 300b - IslandPink 14:14:21 06/19/06 ( 2)
- Re: C3g as driver for 300b - Thorsten 16:02:36 06/19/06 ( 0)
- Re: C3g as driver for 300b - Paul Barker 14:24:21 06/19/06 ( 0)
- Where`s connected G3... - RM 07:08:24 06/19/06 ( 0)