Tube DIY Asylum: Where`s connected G3... by RM

Tube DIY Asylum: Where`s connected G3... by RM

Do It Yourself (DIY) paradise for tube and SET project builders.

FAQ / News / Events

Where`s connected G3...

217.23.193.29

In Reply to: Re: C3g as driver for 300b posted by Paul Barker on June 18, 2006 at 21:47:27:

.. to ground or to anode?
I like pentode operation driver, based on EF80 from "Revox" or E83F from "Telefunken" tube gear.
Nice to read you here Paul. Be frequently here on asylum.
Thanks.

This post is made possible by the generous support of people like you and our sponsors:

Topic - C3g as driver for 300b - horny 14:37:49 06/18/06 ( 13)

Re: C3g as driver for 300b - Thorsten 02:42:25 06/19/06 ( 5)
- Re: C3g as driver for 300b - horny 09:33:55 06/19/06 ( 4)
  - Re: C3g as driver for 300b - Thorsten 09:45:05 06/19/06 ( 3)
    - Re: C3g as driver for 300b - horny 10:16:44 06/19/06 ( 2)
      - Re: C3g as driver for 300b - Thorsten 10:25:16 06/19/06 ( 1)
        
        Re: C3g as driver for 300b - horny 11:35:39 06/19/06 ( 0)
Re: C3g as driver for 300b - berlin 15:19:31 06/18/06 ( 6)
- Re: C3g as driver for 300b - horny 15:30:39 06/18/06 ( 5)
  - Re: C3g as driver for 300b - Paul Barker 21:47:27 06/18/06 ( 4)
    - Re: C3g as driver for 300b - IslandPink 14:14:21 06/19/06 ( 2)
      - Re: C3g as driver for 300b - Thorsten 16:02:36 06/19/06 ( 0)
      - Re: C3g as driver for 300b - Paul Barker 14:24:21 06/19/06 ( 0)
    - Where`s connected G3... - RM 06/19/06 07:08:24 06/19/06 ( 0)