Home
AudioAsylum Trader
Speaker Asylum: 6 - 7 octaves if you're into low fi... by villastrangiato

General speaker questions for audio and home theater.

For Sale Ads

FAQ / News / Events

 

6 - 7 octaves if you're into low fi...

50.133.143.14


[ Follow Ups ] [ Post Followup ] Thread:  [ Display   All   Email ] [ Speaker Asylum ]
[ Alert Moderator ]

Legitimately, the 8530 has an Fs that is closer to 45hz than 30hz. It's response drops off significantly below 60hz in most alignments. So realistically, it's good for about 5 octaves. Six octaves would mean a crossover around 3800 hz which is too high for a 5 inch midwoofer as off axis response drops off sharply due to combing effects. Similarly, use of large drivers (12- 15 inch) has serious drawbacks when implemented in two ways and crossed over from 1500 hz up. Wide variations in off axis response when transitioning from an oversized driver to a tweeter (whether a five inch crossed at 3.8khz or a 15 inch crossed at 1.5khz) kills imaging performance. A smooth transition is required from one driver to the next to achieve a well balanced, high fidelity end result. The Scan Speak 15W8530 is still an excellent driver with a good, usable, 5 octave bandwidth. But it is not the best thing since sliced bread as the OP seems to suggest. Like anything else, it has its strengths and limitations. It's primary limitation is pretty well acknowledged by the company that makes it. It's advertised as a MIDWOOFER - not a woofer, not a tweeter, and not a full range.


This post is made possible by the generous support of people like you and our sponsors:
  Crux Audio  



Topic - Best Mid-Bass of All Times! - Belgarchi 18:51:03 07/8/12 ( 80)