Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.
You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.

You must login to use this feature.

Inmate Login

By default, logging in will set a session cookie that disappears when you close your browser. Clicking on the 'Remember my Moniker & Password' below will cause a permanent 'Login Cookie' to be set.

Moniker/Username: The Name that you picked or by default, your email. Forgot Moniker?	Examples "Rapper", "Bob W", "joe@aol.com".
Password:	Forgot Password?
	Remember my Moniker & Password ( What's this?)

If you don't have an Asylum Account, you can create one by clicking Here.

Our privacy policy can be reviewed by clicking Here.

Inmate Comments

From:
Your Email:
Subject:

Message Comments

Original Message

Recommend cotton.

Posted by Al Sekela on January 21, 2011 at 12:30:34:
Techflex and the like are made of nasty dielectrics and degrade the performance of anything they come near, IMO.

I agree that the jacket color of Power Wraps is unfortunate, to put it politely.

It will help the performance to apply acoustic damping materials to Power Wraps. While they are effective dampers for RF electromagnetic energy, they also have strong acoustic resonances. Acoustic vibration causes the Power Wrap to interact with the audio band signal.

The material that I've found that gives acoustic damping without injecting nasty dielectric effects is pure (not blended with polyester) cotton batting. I wrap the cable with enough batting to cause the Power Wrap to be a tight fit, then overwrap the Power Wrap tightly with more batting. Cut the batting into convenient strips for wrapping.

You can leave it the natural color or cover with appropriate cotton fabric for a designer finish.

Further tweaks depend on the extent to which you desire to modify the cord. Power Wrap performance can also be improved by making electrical connection to the AC safety-earth at the load end of the cord. It may be necessary to use something like a 100 ohm, half-watt, PRP resistor in series.

Multiple Power Wraps to cover more of the cord also help. These should be joined electrically end-to-end. The Power Wraps are made of Teflon and the proprietary damping wire. It is easy to solder to the exposed wire with a beefy iron, say 40 watts or more. Heat shrink tubing should be used sparingly if at all. I don't like the sonic effects of even the more expensive polyolefin heat shrink tubing.