|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
For Sale Ads |
Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.
Original Message
RE: my bias is running away on one side even with the bias backed all the way off on that side!
Posted by Jonesy on July 23, 2020 at 17:32:42:
The black 540 with silver stripe are "diodes". You're DVM should have a diode check option so you can recheck those with it. Negative probe goes to the silver stripe side. You should get a reading. Reversing the DVM leads should read infinite. Do this to both diodes and see how they compare.
If the Jensen cap had the wires unscrewed when tested, then indeed it is bad. BUT, replace it with a cheap cap first to see if that was the problem. So if you order a replacement Jensen, also order another cap or two of something less exotic to try first. Don't want to ruin a new Jensen.
Electrolytic caps should last about 20 years. Depending on age, you may wish to replace them all.
I've provided a link for an on-line resistor calculator as a quick was to determine values when only color bands are present on the resistor. I couldn't find the one I normally use, but this one looks ok.
Cheers!
Jonesy