Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.
You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.

You must login to use this feature.

Inmate Login

By default, logging in will set a session cookie that disappears when you close your browser. Clicking on the 'Remember my Moniker & Password' below will cause a permanent 'Login Cookie' to be set.

Moniker/Username: The Name that you picked or by default, your email. Forgot Moniker?	Examples "Rapper", "Bob W", "joe@aol.com".
Password:	Forgot Password?
	Remember my Moniker & Password ( What's this?)

If you don't have an Asylum Account, you can create one by clicking Here.

Our privacy policy can be reviewed by clicking Here.

Inmate Comments

From:
Your Email:
Subject:

Message Comments

Original Message

RE: 400 ohms/0.4 volts gives 1 ma of current

Posted by vetmedrobert@gmail.com on June 27, 2017 at 12:50:57:
No grid was harmed in this experiment. Output was connected to secondary of IT I intend to use in a yet to be constructed amp. What I did initially was connect the negative output to one end of the winding and the positive end of the supply to the other of the winding. I then attached the meter one lead to each end of the winding. This is what gave me -0.4 volts. After my first post I connected one end of the winding to the negative output and the other to the red lead of the meter and the black lead of the meter connected to the positive ground of the supply. I was able to adjust this to the -32 volts I wanted. Hope this clarifies things.