|
Speaker Asylum General speaker questions for audio and home theater. |
For Sale Ads |
Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.
Original Message
Building a speaker, looking for opinions on set-up.
Posted by Gataca on March 19, 2012 at 22:00:58:
So, I'm building a set of speakers using:
8 Dayton Audio DC160-8: (4 in each cabinet)
Power handling: 50 watts RMS/75 watts max • VCdia: 1-3/8" • Le: 2.34 mH • Impedance: 8 ohms • DC resistance: 6.7 ohms • Frequency response: 30-4,000 Hz • Magnet weight: 15 oz. • Fs: 34 Hz • SPL: 88 dB 1W/1m • Vas: 0.87 cu. ft. • Qms: 3.47 • Qes: 0.36 • Qts: 0.33 • Xmax: 3.15 mm
2 Usher 9950-20:
Power handling: 10 watts RMS/15 watts max (full range signal) • VCdia: 1-1/8" • Impedance: 8 ohms • Re: 4.7 ohms • Frequency range: 1,500-20,000 Hz • Fs: 560 Hz • SPL: 88 dB 2.83V/1m
Crossover at 2500
I will be powering each with 265 watts rms, per channel.
Does anyone see an issue with this set-up?