Small Boat Forum

Welcome! Need support, you got it. Or share you ideas and experiences.

Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.
You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.

You must login to use this feature.

Inmate Login

By default, logging in will set a session cookie that disappears when you close your browser. Clicking on the 'Remember my Moniker & Password' below will cause a permanent 'Login Cookie' to be set.

Moniker/Username: The Name that you picked or by default, your email. Forgot Moniker?	Examples "Rapper", "Bob W", "joe@aol.com".
Password:	Forgot Password?
	Remember my Moniker & Password ( What's this?)

If you don't have an Asylum Account, you can create one by clicking Here.

Our privacy policy can be reviewed by clicking Here.

Inmate Comments

From:
Your Email:
Subject:

Message Comments

Original Message

Re: gamefisher 3HP

Posted by Tailgunner on June 16, 2003 at 11:29:36:
There are numerous posts on everything from rebuilding carbs to ignition problems about Gamefisher motors here. The first thing to do if one has set for 8 years is to check for spark. If that is ok next rebuild the carb. Instructions are on an earlier post. Then replace the fuel line from the tank to motor and any filters and primer bulb if so equipped. Use clean mid grade gas and out board oil for aircooled or water cooled motor. I think yours is air cooled. Probably a techumseh motor. mix to 16 to 1 ratio oil and gas per instructions on the gas cap or oil bottle. new plugs gapped @ 035 and points gapped @016. If after all this she won't start email me. I can explain how to adjust the carb etc, if you can't find it on the forum. I collect gamefishers and parts. Never throw a motor away. I take donations for basket cases. Good Luck and smooth sailing, Tailgunner