Propeller Head Plaza

Technical and scientific discussion of amps, cables and other topics.

Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.
You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.

You must login to use this feature.

Inmate Login

By default, logging in will set a session cookie that disappears when you close your browser. Clicking on the 'Remember my Moniker & Password' below will cause a permanent 'Login Cookie' to be set.

Moniker/Username: The Name that you picked or by default, your email. Forgot Moniker?	Examples "Rapper", "Bob W", "joe@aol.com".
Password:	Forgot Password?
	Remember my Moniker & Password ( What's this?)

If you don't have an Asylum Account, you can create one by clicking Here.

Our privacy policy can be reviewed by clicking Here.

Inmate Comments

From:
Your Email:
Subject:

Message Comments

Original Message

Crosstalk between gain stages of Mesa Road King II guitar amplifier

Posted by cheater00 on February 5, 2016 at 06:45:24:
Hi guys,
I'm new to this forum so if I'm breaking any rules please let me know! :)

I have a Mesa Road King II here. It's basically a very souped up Dual Rectifier. It's not doing what I would like it to be doing.

You can find a schematic here:
http://milas.spb.ru/~kmg/files/schematics/Mesa%20Boogie/Mesa%20Boogie%20Road%20King%20II.pdf

The amp is in pretty good condition, however the stages have a lot of crosstalk. What I mean by this is: if I make the signal run through an effects loop, and put empty plugs into the send/return, the amp should be totally quiet, but a lot of sound does come through. If you look at the schematic, the (two) loops are between V5a and V5b which is a 12ax7. The sound that comes through is fairly loud especially compared to normal practice-at-home levels; it's a bit bypassed. Either way, it means to me that V6 is getting the signal somehow through a voltage rail or some other way.

What this results in is that when my nice Decimator G-String II gate cuts out because I've palm muted the guitar, i still get a lot of string rattle coming through, which pretty much makes the gating useless. The gate gets its control signal from unprocessed guitar, but it mutes at the very end, in the last effects chain.

Here's how the leakage responds to the various controls on the amp:

chan 1/2 master: at 0, there is no output. turning up to max makes the output loud.
chan 3/4 master: at 0, there is noticeable output. turning up to max adds bass to the leaked signal or seems to change the resonance of whatever "send level" is doing.
gain: at 0, no leaking. at max, noticeable output.
presence, bass, mid, treble, raw/vintage/modern switch, clean/fat/brit or clean/fat/tweed switch: no control of leaked signal at all
output: at the lowest setting, there's noticeable output. then as you go 5% up the output becomes duller and a bit quieter(but there's still a lot of low signal leaking through, just the high freqs are attenuated), then as you turn output up it becomes really, really, really loud.

signal leaks even with tuner mute engaged, but a bit quieter. BTW, engaging tuner mute results in a really loud popping noise.
send level (on the back) seems to not control the loudness of the leak at all, but there is a resonance, like a 4th order resonant peaking EQ, and as you turn the knob, the resonance sweeps frequency. So it's like the freq knob of a really nasty peaking EQ.
taking out V4 or V5 changes nothing, the leak persists. removing either V1, V2, V3 or V6 turns off the sound completely, including the leak, and the usual expected hum/buzz that you get even when the guitar is perfectly quiet.

I have several questions. I would appreciate it if anyone could help me with this as it's really making the amp terrible! :(
1. Has anyone come across this kind of issue?
2. How do I fix this?
3. Where would the crosstalk be coming from? Could it be coming from the preamp tubes' "C" voltage rail? That's the HV rail going to the preamp tubes. Are there any other places the leak might be occurring?
4. Could this be due to dual tubes being used rather than singles? AKA could two halves of a tube be leaking to one another?
5. Could this be fixed by re-biasing the tubes in the preamp? Especially what I assume is a differential push-pull pair made out of V6a and V6b.
6. Can I decouple the C rail? The idea was to do something like this:
http://tinyurl.com/j35c7dq
however I've never worked with tube circuits and don't know how the tubes might react to this kind of thing. Naturally the values are wrong but that's the topology.
7. Does anyone know of a good mailing list or forum that talks only about servicing and modifying Mesa/Boogie amplifiers? Or just in general only tube guitar amps?

Thanks everyone!