|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
For Sale Ads |
Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.
Original Message
RE: Pure Audio Project Open Baffles & 2 Questions
Posted by Gerry E. on April 19, 2017 at 14:34:06:
Thanks Mick! Also for mentioning the Audio Circle OB forum. I didn't know or forgot about it. I took a look and there appears to be lots of interesting and active threads.
Here are a few thoughts I didn't mention in my original post because it was already a bit long. The reason I originally bi-amped the system is because the PAP Neodymium woofers are less sensitive than my Altec/Jensen drivers. With the Crown woofer amp, I was able to dial up the woofer level to match the other drivers. However, two items made me think the new setup could work.
The first is a quote from the woofer product design manager: "(this model) can play with any tube amp starting at 3.5w. They are very responsive 95/96db drivers!" The second is that I believe having 2 woofers per side increases the output somewhere between 3 and 6db.
Even though those factors should get the woofers up to the level I need, in practice I did lose some bass below 40hz. Of course we are comparing 8 watts vs. 525w for the Crown amp into 4 ohms. However, running the speakers full range using just the Bottlehead Paramount 300B amps sounds better!
My only concern now is the speaker system impedance. My Paramounts are upgraded with Magnequest BH-5 output transformers and only have 8 and 16 ohm taps. If my OB impedance is much lower than 8 ohms, I wonder what impact that has power or distortion? I know impedance calculations can be complicated and that it varies with frequency so that's why I asked the impedance question.
Gerry