High Efficiency Speaker Asylum

Need speakers that can rock with just one watt? You found da place.

Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.
You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.

You must login to use this feature.

Inmate Login

By default, logging in will set a session cookie that disappears when you close your browser. Clicking on the 'Remember my Moniker & Password' below will cause a permanent 'Login Cookie' to be set.

Moniker/Username: The Name that you picked or by default, your email. Forgot Moniker?	Examples "Rapper", "Bob W", "joe@aol.com".
Password:	Forgot Password?
	Remember my Moniker & Password ( What's this?)

If you don't have an Asylum Account, you can create one by clicking Here.

Our privacy policy can be reviewed by clicking Here.

Inmate Comments

From:
Your Email:
Subject:

Message Comments

Original Message

RE: electrovoice sentryV 1 a

Posted by Paul Eizik on February 4, 2017 at 11:40:57:
Jason

I have some STR Tweeter Protectors from the late 80's. I had these in my system for several years and I never heard them cut out even with a 100 WPC transistor amp, and they went in the parts box some time ago. The instructions are indeed confusing. The photo in the instructions appears to show two wires together (like thin lamp cord) on the input side (left), and two other wires together on the output side (right). Is this correct? I can't find mine at the moment to verify. If this is so then one of the Input pair (the striped one) is connected to the crossover plus, and the other one is connected to the crossover minus or Com (common). The striped wire of the Output pair should be connected to the tweeter plus (T1) while the other output wire should be connected to the tweeter minus (T2). At least this makes sense according to the schematic in figure 1, and the diagram in figure 2 in the instructions.

BTW I have no idea what wire was used in the Sentrys, but Monster XP is easily available now and reasonably priced.

Hope this helps

Paul