|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
For Sale Ads |
Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.
Original Message
RE: 16 horns measurements
Posted by jweiss on December 11, 2010 at 11:24:21:
There is a considerable disparity between the measurements taken of the RCA MI 1428 driver on the AH300 horn at ETF from our measurements. I've attached our impulse curve, for example, for comparison. At the OMA site I will add some additional curves, such as frequency response, which significantly deviate from those shown at the link in this thread that were done at ETF.
The impulse curves show the RCA MI1428 vs. the much more modern TAD driver for comparison. This measurement was done on an industry standard TEF analyser, with ACO calibrated lab microphone. This is a curve that can be reproduced by any lab anywhere at anytime.
Jonathan