Critic's Corner

Discuss a review. Provide constructive feedback. Talk to the industry.

Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.
You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.

You must login to use this feature.

Inmate Login

By default, logging in will set a session cookie that disappears when you close your browser. Clicking on the 'Remember my Moniker & Password' below will cause a permanent 'Login Cookie' to be set.

Moniker/Username: The Name that you picked or by default, your email. Forgot Moniker?	Examples "Rapper", "Bob W", "joe@aol.com".
Password:	Forgot Password?
	Remember my Moniker & Password ( What's this?)

If you don't have an Asylum Account, you can create one by clicking Here.

Our privacy policy can be reviewed by clicking Here.

Inmate Comments

From:
Your Email:
Subject:

Message Comments

Original Message

Example: ribbon tweeters

Posted by Doug Schneider on January 27, 2017 at 09:42:27:
Hi,

The audibility of distortions is certainly not clear cut -- lots of research going on -- but there are some areas where what you measure and what you hear are strongly correlated. I'll give you one very straightforward example: ribbon tweeters.

We've been measuring speakers with ribbon tweeters for well over a decade and, often, we've found that reviewers hear a harsh, aggressive sound from them when the music gets turned up. If you look at the distortion on ribbons, below about 3500Hz the distortion rises at an increasing rate until you get to about 2000Hz, which is where many companies choose to cross them over in two-ways to get a proper blend with the mid-woofer, where it wants to shoot through the roof. Oftentimes, it's over 10%, even higher.

What's happening? From what I can tell, most ribbons don't have the excursion to reproduce frequencies that low, so it's cranking out a distorted sound. Simple as that -- and it's easily measurable. Funny thing is, I was talking to a recording engineer about this and he said, "You know what, sax players love ribbon microphones, because they have bite." That bite, I bet, is that harsh, aggressiveness you can hear from a ribbon tweeter. In fact, nowadays when we get a ribbon-based speaker in, whenever I can, I'll often ask the designer, "How do you deal with the distortion?" When they know what they're doing, they'll tell you.

Anyway, that's one example where you can look at the distortion plot and correlate it very strongly with the sound.

Doug Schneider
SoundStage!