Cable Asylum

Interconnects, speaker wire, power cords. Ask the Cable Guys.

Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.
You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.

You must login to use this feature.

Inmate Login

By default, logging in will set a session cookie that disappears when you close your browser. Clicking on the 'Remember my Moniker & Password' below will cause a permanent 'Login Cookie' to be set.

Moniker/Username: The Name that you picked or by default, your email. Forgot Moniker?	Examples "Rapper", "Bob W", "joe@aol.com".
Password:	Forgot Password?
	Remember my Moniker & Password ( What's this?)

If you don't have an Asylum Account, you can create one by clicking Here.

Our privacy policy can be reviewed by clicking Here.

Inmate Comments

From:
Your Email:
Subject:

Message Comments

Original Message

Just completed 11 ft pair

Posted by beserker on July 27, 2001 at 02:57:12:
I started with 14 ft runs of the cat5 which braided down to 13, 12, and finally 11 ft with each successive braid. I terminated with post master spades and esoteric audio bananas from parts express. I then covered with violet 3/4" B2 heatshrink and 1/2" B2 for the leadouts. I covered that with 3/8" slate blue PET techflex and 1/4" for the leadouts. Finally for all the strain relief and holding the techflex in place I used 1/2" O2B2 in red and black and 3/4" O2B2 in black. The only problem I encountered was that the 1/2" O2B2 holding the techflex near the bananas was a little tight going on. But I have to say every thing looks and sounds amazing.
Hope this helps,
Jessie