|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: all due respect - you and Jelco are wrong ... posted by VynylTap on January 17, 2010 at 19:55:42:
You mounted your tonearm at 214 mm from the spindle, and aligned it to acheive an effective length of 232 mm. This is accroding to the information in YOUR OWN post below.
YOUR OWN cartridge could have been aligned to provide an effective length of 229 mm by moving the cartridge back in the headshell by about 3 mm. In fact, there is another 5 mm in the headshell according to YOUR OWN information. So based on YOUR OWN information, the effective length could have been reduced to ~227 mm by pushing the cartridge fully back in the headshell.
So the "JUST ONE" cartridge that you are looking for is YOUR OWN Dynavector 20XL.
Incidentally, the way you measured the mounting distance is not accurate. You need to measure from the centre of the mounting hole to the spindle. An elevated measurement is going to add an uncertainty of ~+/-1 mm, and using the edges of a piece of corrigated cardboard is going add further uncertainty to the measurement.
BK
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- YOUR OWN numbers provide the answer to your question. - B.K. 02:49:36 01/18/10 (22)
- What are you talking about??? No, no, no. - VynylTap 12:10:41 01/18/10 (21)
- Then stop wasting your (and my) time here. - B.K. 15:00:59 01/18/10 (20)
- I'm done. Buy the arm. Actually mount it at 214 mm and then get back to me. - VynylTap 20:12:01 01/18/10 (1)
- You are done, because your whole arguemnt is without basis. - B.K. 00:29:11 01/19/10 (0)
- Pictures - B.K. 16:11:39 01/18/10 (17)
- Beautiful. Different arm. (nt - good grief) - VynylTap 20:14:28 01/18/10 (3)
- Are you setting out to demonstrate that you are IMPERVIOUS to logic? - B.K. 00:47:35 01/19/10 (2)
- It's a different arm with a different effective length!!! That's not a 750D is it? - VynylTap 14:16:36 01/19/10 (1)
- Why would anyone think you are being a jerk? NT - B.K. 15:46:29 01/19/10 (0)
- I have that Jelco headshell... - Ivan303 19:14:56 01/18/10 (4)
- Basically, that's it - B.K. 00:30:36 01/19/10 (3)
- explain this then please... and I will concede defeat - VynylTap 14:31:47 01/19/10 (2)
- Incorrect again - B.K. 15:45:26 01/19/10 (1)
- BTW - I'm truly convinced this is an actual Asylum at this point. - VynylTap 16:30:20 01/19/10 (0)
- Could this be the explanation? - hesson11 17:46:39 01/18/10 (5)
- Not really . - B.K. 00:45:27 01/19/10 (0)
- B.K. DOESN'T own a Jelco arm - VynylTap 20:20:56 01/18/10 (3)
- BK owns 2 Jelco arms NT - B.K. 00:48:30 01/19/10 (2)
- a 750D? - VynylTap 13:57:17 01/19/10 (1)
- You're right, I think you are trying to be a jerk - here's the basis - B.K. 15:40:50 01/19/10 (0)
- "I don't own an SA 750D and never claimed to own one." - VynylTap 16:21:30 01/19/10 (0)
- "Yes, I'm now being an ass" that's correct you are. NT - B.K. 16:40:46 01/19/10 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
