Question for Opus 104.... or others

Follow Ups Full Thread

Topic - My SL1210mk2 in pieces. What now? - AbeCollins 20:52:10 01/16/10 (83)

The DL-103r was the only cart to benefit from the - VynylTap 20:19:12 01/17/10 (1)

Nice to read an INFORMED opinion, - cactuscowboy@bresnan.net 07:53:17 01/18/10 (0)

So what do you think of the build quality?....nt - kootenay 16:08:44 01/17/10 (2)

I don't know how they do it for the price - AbeCollins 22:13:20 01/17/10 (1)

RE: I don't know how they do it for the price - cactuscowboy@bresnan.net 16:22:00 01/18/10 (0)

RE: My SL1210mk2 in pieces. What now? - GBLPS 14:32:18 01/17/10 (2)

RE: My SL1210mk2 in pieces. What now? - AbeCollins 15:00:58 01/17/10 (1)

RE: My SL1210mk2 in pieces. What now? - GBLPS 07:31:30 01/18/10 (0)

Just let us know when you get it all back together... - NoClue48 14:27:22 01/17/10 (1)

RE: Just let us know when you get it all back together... - AbeCollins 14:54:46 01/17/10 (0)

RE: My SL1210mk2 in pieces. What now? - Stale 08:23:49 01/17/10 (0)

RE: My SL1210mk2 in pieces. What now? - philltubes 08:09:36 01/17/10 (0)

Effective Length of Jelco SA-750D not the same as Rega tonearms. - B.K. 07:37:29 01/17/10 (1)

Correct. The SA-370H is the same as the RB-250/300. (see below). /nt\ - Opus 104 07:53:17 01/17/10 (0)

How much do you want to spend on a new arm? nt - olddude55 07:33:10 01/17/10 (2)

Not too much, certainly less than $500 -nt - AbeCollins 10:10:51 01/17/10 (1)

In that price range - olddude55 10:19:48 01/17/10 (0)

Abe, the Jelco SA-370H uses the same mounting geometry as the Rega 250/300 - Opus 104 05:20:36 01/17/10 (7)

Question for Opus 104.... or others - AbeCollins 12:12:17 01/17/10 (5)

IMO, I'd have Kevin do a Cardas re-wire on the Technics arm. - Opus 104 13:36:42 01/17/10 (0)

IF and only IF the SA-750D has an effective mass of 18 grams... - Ivan303 13:17:03 01/17/10 (0)

If you want to go DL-103 - olddude55 12:56:30 01/17/10 (0)

RE: Question for Opus 104.... or others - amandarae 12:53:56 01/17/10 (0)

RE: Question for Opus 104.... or others - philltubes 12:40:51 01/17/10 (0)

Also . . . - Opus 104 05:35:11 01/17/10 (0)

Suspect Jelco specs and geometry - hesson11 05:04:03 01/17/10 (36)

Nothing suspect about their tonearm dimensions - B.K. 05:15:53 01/17/10 (35)

all due respect - you and Jelco are wrong ... - VynylTap 19:55:42 01/17/10 (25)

YOUR OWN numbers provide the answer to your question. - B.K. 02:49:36 01/18/10 (22)

What are you talking about??? No, no, no. - VynylTap 12:10:41 01/18/10 (21)

Then stop wasting your (and my) time here. - B.K. 15:00:59 01/18/10 (20)

I'm done. Buy the arm. Actually mount it at 214 mm and then get back to me. - VynylTap 20:12:01 01/18/10 (1)

You are done, because your whole arguemnt is without basis. - B.K. 00:29:11 01/19/10 (0)

Pictures - B.K. 16:11:39 01/18/10 (17)

Beautiful. Different arm. (nt - good grief) - VynylTap 20:14:28 01/18/10 (3)

Are you setting out to demonstrate that you are IMPERVIOUS to logic? - B.K. 00:47:35 01/19/10 (2)

It's a different arm with a different effective length!!! That's not a 750D is it? - VynylTap 14:16:36 01/19/10 (1)

Why would anyone think you are being a jerk? NT - B.K. 15:46:29 01/19/10 (0)

I have that Jelco headshell... - Ivan303 19:14:56 01/18/10 (4)

Basically, that's it - B.K. 00:30:36 01/19/10 (3)

explain this then please... and I will concede defeat - VynylTap 14:31:47 01/19/10 (2)

Incorrect again - B.K. 15:45:26 01/19/10 (1)

BTW - I'm truly convinced this is an actual Asylum at this point. - VynylTap 16:30:20 01/19/10 (0)

Could this be the explanation? - hesson11 17:46:39 01/18/10 (5)

Not really . - B.K. 00:45:27 01/19/10 (0)

B.K. DOESN'T own a Jelco arm - VynylTap 20:20:56 01/18/10 (3)

BK owns 2 Jelco arms NT - B.K. 00:48:30 01/19/10 (2)

a 750D? - VynylTap 13:57:17 01/19/10 (1)

You're right, I think you are trying to be a jerk - here's the basis - B.K. 15:40:50 01/19/10 (0)

"I don't own an SA 750D and never claimed to own one." - VynylTap 16:21:30 01/19/10 (0)

"Yes, I'm now being an ass" that's correct you are. NT - B.K. 16:40:46 01/19/10 (0)

I was hoping you'd see this, 'Tap... - hesson11 21:26:20 01/17/10 (1)

Worked great with the DL-103r - VynylTap 13:09:15 01/18/10 (0)

You'd think! - hesson11 08:43:06 01/17/10 (8)

The tonearm headshells have extra long slots - B.K. 09:37:44 01/17/10 (7)

With the arm mounted at 214mm and 66/120.9 null points - VynylTap 20:13:06 01/17/10 (4)

In your original post, you didn't show that the effective length was not equal to 229mm. - B.K. 03:05:06 01/18/10 (3)

you're reading the post wrong - I clearly say it's 232mm. - VynylTap 12:15:40 01/18/10 (2)

No, YOU are READING badly. - B.K. 00:49:56 01/19/10 (1)

all it takes is looking at the technical drawing you're basing all your assumptions on - VynylTap 14:34:45 01/19/10 (0)

RE: The tonearm headshells have extra long slots - dean man jim 10:32:24 01/17/10 (1)

Well, that could explain a lot! Thanks. n/t - hesson11 12:12:00 01/17/10 (0)

I used an OL arm board graciously donated by Opus 104. - olddude55 04:38:58 01/17/10 (0)

RE: My SL1210mk2 in pieces. What now? - Solidcore 01:02:35 01/17/10 (0)

RE: My SL1210mk2 in pieces. What now? - Solidcore 00:42:36 01/17/10 (0)

I wonder what arm plate olddude55 used for his linear tracker on the SL1200. ?? - about2 22:38:55 01/16/10 (0)

A question and some comments - cactuscowboy@bresnan.net 22:08:15 01/16/10 (5)

Pivoted - hukkfinn 07:33:58 01/17/10 (2)

Agreed and... - blake 09:05:14 01/17/10 (0)

I'd be the first one to say that the standard Technics arm does not suck. - olddude55 07:48:01 01/17/10 (0)

The Rabco was artlessly screwed to the Technics plinth - olddude55 04:40:53 01/17/10 (0)

I think Henry donated an aluminum armboard.... - tubesforever 00:54:56 01/17/10 (0)

You are there! - Panelhead 22:06:04 01/16/10 (0)

replinth it... - johnirwin 21:48:58 01/16/10 (0)

Needle Doctor has the OL Rega armboard for $99 - Ivan303 21:01:36 01/16/10 (3)

Thanks! I'll look into it.... - AbeCollins 21:44:20 01/16/10 (2)

RE: Thanks! I'll look into it.... - blake 14:46:59 01/17/10 (1)

Thanks.... - AbeCollins 15:31:19 01/17/10 (0)

RE: My SL1210mk2 in pieces. What now? - rich121 20:56:01 01/16/10 (4)

RE: My SL1210mk2 in pieces. What now? - AbeCollins 21:01:34 01/16/10 (3)

Have you checked the Vinyl Engine for a SM/Schematic? - Opus 104 05:09:42 01/17/10 (0)

RE: My SL1210mk2 in pieces. What now? - rich121 21:27:18 01/16/10 (1)

RE: My SL1210mk2 in pieces. What now? - majick47 08:50:58 01/17/10 (0)

Follow Ups

Question for Opus 104.... or others - AbeCollins 12:12:17 01/17/10 (5)

IMO, I'd have Kevin do a Cardas re-wire on the Technics arm. - Opus 104 13:36:42 01/17/10 (0)

IF and only IF the SA-750D has an effective mass of 18 grams... - Ivan303 13:17:03 01/17/10 (0)

If you want to go DL-103 - olddude55 12:56:30 01/17/10 (0)

RE: Question for Opus 104.... or others - amandarae 12:53:56 01/17/10 (0)

RE: Question for Opus 104.... or others - philltubes 12:40:51 01/17/10 (0)

Post a Message!