Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: My SL1210mk2 in pieces. What now? posted by AbeCollins on January 16, 2010 at 20:52:10:
I assume that by now you've taken delivery of the KAB SL-1200 with tonearm dampener and Cardas rewire? If so, what do you think of its performance versus stock unmodified?
I don't quite understand why you'd want to remove and replace the stock tonearm with a Jelco. The Jelco is decent (I've got one on my Technics SP-15) but I don't see that it's going to be any improvement over the Technics tonearm. If you want a tonearm with greater mass to better match the Denon DL103, wouldn't it make sense to simply add a heavier headshell and additional counterweight to the stock tonearm?
If I were going to replace the tonearm on my Technics, I would not bother swapping another pivoted tonearm onto it. If anything, I'd put a linear tracker onto it.
I believe Olddude simply clamped a linear tracking tonearm onto the plinth of his Technics, without need for a custom armboard.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- A question and some comments - cactuscowboy@bresnan.net 22:08:15 01/16/10 (5)
- Pivoted - hukkfinn 07:33:58 01/17/10 (2)
- Agreed and... - blake 09:05:14 01/17/10 (0)
- I'd be the first one to say that the standard Technics arm does not suck. - olddude55 07:48:01 01/17/10 (0)
- The Rabco was artlessly screwed to the Technics plinth - olddude55 04:40:53 01/17/10 (0)
- I think Henry donated an aluminum armboard.... - tubesforever 00:54:56 01/17/10 (0)