Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Vinyl Asylum ]

---

[ Alert Moderator ]

---

RE: I've also been exploring this kind of stuff recently...

Posted by Ungie (M) on May 17, 2009 at 07:44:00

In Reply to: I've also been exploring this kind of stuff recently... posted by John Elison on May 16, 2009 at 13:28:02:

I have attached a couple of photos showing a graph similar to the ones on the Feickert website. The dB scale should be negative dB as it's level below reference. I noted that the phase response crossing was at the same point that crosstalk figures coincided, at a CW rotation of 2.5 degrees. At the outer end of what should be required but my cantilever is skewed a little from the factory. I used the 0 degree setting as the one where the top of the cartridge body is level, not a visual azimuth point. So I would guess me skew from visual alignment is about 1.5 degrees CW or so.
There is also a photo showing how the cartridge looks playing an LP with this azimuth setting.

I hope this was of some interest.
Next step is to investigate anti-skating!

Andrew

This post is made possible by the generous support of people like you and our sponsors:

Signature Sound

[ Signature Sound Lounge ]

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---