Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
OK - so I'm just getting refurbed TD-125 into running order.
The question I have is getting it all level.I have this little bubble level which came with an older Benz cartridge and the problem is that when I place an lp on the rig and then put the bubble level at several points around the disc I am not getting a uniform result. Warped lp's? warped platter? warped house?
I've got the levelling knobs set so that in the sweep/arc/path of the arm across an lp the bubble reads almost bang on. Do I need to fret with this any further? On the old Rega planar 3 it was easy just to shim one of the feet a bit - but lifting up the td-125 plinth to twist the knobs is a p.i.t.a.
Steve in Vancouver - aka sapdog
This post is made possible by the generous support of people like you and our sponsors:
Topic - getting on the level - sapdog 11:00:25 05/10/07 (14)
- Re: getting on the level - Do it right! - JerryS 10:05:20 05/12/07 (0)
- Throw the little toy away and go get a 9 inch torpedo level - artemus 13:08:05 05/10/07 (3)
- Re: Throw the little toy away and go get a 9 inch torpedo level - mt10425 13:47:25 05/10/07 (2)
- Re: Throw the little toy away and go get a 9 inch torpedo level - artemus 07:01:57 05/11/07 (1)
- Re: Throw the little toy away and go get a 9 inch torpedo level - mt10425 13:26:32 05/11/07 (0)
- why don't you try... - analog guy 11:33:43 05/10/07 (7)
- What's a "bar level"? - Jay F 12:56:05 05/10/07 (4)
- Depends .... - Elmo 08:12:55 05/11/07 (1)
- Re: Depends .... - Jay F 09:27:46 05/11/07 (0)
- clarification - analog guy 13:01:16 05/10/07 (1)
- Good. That's the kind I use. /nt/ - Jay F 07:00:47 05/11/07 (0)
- Re: why don't you try... - sapdog 11:38:28 05/10/07 (1)
- i think you'll be fine - analog guy 12:03:31 05/10/07 (0)