|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: Michell Gyro Bearing Blues posted by Triode Junky on May 2, 2007 at 13:41:08:
Have you carefully examined the bearing spindle and housing for damage? I can't hear the slightest peep out of mine.If everything looks okay, you might try removing the oil from the bearing sump (soak it up with a paper towel or use a syringe), and flush out the bearing with a little lighter fluid in case there's some fine metal particles or dirt present.
Clean out the lighter fluid, flush it again with fresh oil, and refill the sump.
That's all I can think of off hand. Good luck!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: RE: Michell Gyro Bearing Blues - Fretless 13:56:47 05/02/07 (7)
- Agreed.... - damage k 14:15:49 05/02/07 (6)
- Re: Agreed.... - FrankC 15:26:08 05/02/07 (5)
- Re: Agreed.... - Ronnie.S 11:49:07 05/03/07 (3)
- Thanks for the info! - FrankC 13:34:24 05/03/07 (2)
- Keep us posted.... - damage k 15:10:30 05/03/07 (0)
- Correction: Silicon Nitride ball bearing. (nt) - FrankC 13:41:10 05/03/07 (0)
- If you're in the US try contacting Artech... - lenzkap 16:59:00 05/02/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
