|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
Hello everyone!I'm new to vinyl, bought a one month used Music Hall MMF-5 recently, with the stock Goldring 1012GX cartridge.
I did the vertical alignment of the cartridge and set the tracking force. After that, the bottom of the cartridge is 1mm (or almost 1/32") away from the record. Does this seem to be the right distance?
This post is made possible by the generous support of people like you and our sponsors:
Topic - Distance between cartridge and record? - Garold 04:15:21 05/01/07 (8)
- Re: Distance between cartridge and record? - jnorre 03:26:36 05/02/07 (0)
- You did use an external gauge to set VTF, right? /nt\ - HenryH 04:24:56 05/01/07 (6)
- Re: You did use an external gauge to set VTF, right? /nt\ - Garold 12:04:02 05/01/07 (5)
- No, VTF=vertical tracking force. In other words, stylus force. /nt\ - HenryH 12:34:13 05/01/07 (4)
- Re: No, VTF=vertical tracking force. In other words, stylus force. /nt\ - Garold 12:46:11 05/01/07 (3)
- You need an external gauge. Shure makes a simple beam one for $25. - HenryH 12:50:19 05/01/07 (2)
- Re: You need an external gauge. Shure makes a simple beam one for $25. - Garold 13:45:47 05/01/07 (1)
- One-millimeter sounds a bit close to me.... - John Elison 15:49:50 05/01/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
