Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Seeking loading recommendations on Benz Ace Medium...(Risabet..are you listening?) posted by Scottrt on April 25, 2007 at 03:26:44:
I have mine loaded at 214 ohms or so through the Cinemags. I have a Monster y-connector plugged into the input of the preamp. In one of the y-connector inputs I have male RCA's w/ 27400 ohm resistors soldered in for an equivalent impedance of 17309 ohms. The other y input has the output from the Cinemags. With the 47kOhms of the phono input and the impedance of the transformer this gives a load to the cartridge of around 214 ohms which I find is perfect.It is easy to experiment also. Just make up some different loading RCA's w/ different value resistors and swap them.
I use a quick Excel sheet to calculate the values.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Seeking loading recommendations on Benz Ace Medium...(Risabet..are you listening?) - risabet 14:02:28 04/25/07 (6)
- Seeking loading recommendations to acheive 1K Ohms - fishy 17:28:05 04/25/07 (2)
- Re: Seeking loading recommendations to acheive 1K Ohms - risabet 19:42:40 04/25/07 (0)
- not risabet but, a 1k ohm resistor - OMalley 18:09:59 04/25/07 (0)
- Hey Risabet... - Scottrt 14:39:33 04/25/07 (2)
- Re: Hey Risabet... - risabet 14:55:29 04/25/07 (1)
- yep... - Scottrt 15:24:27 04/25/07 (0)