Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Re: Which proves that the stylus does not melt the vinyl posted by John Elison on April 16, 2007 at 09:26:16:
> Skating force is proportional to friction and also proportional to distance
> between the friction point (stylus) and center of the rotating disk.Skating force is proportional to friction, but it is not proportional to the distance between the stylus and the center of the disk. On the other hand, skating force changes slightly as the tonearm traverses the record as a result of
---
However, there are several experiments showing that skating force also increases across the whole disc, not because of velocity as such, but because of the more packed modulations compensating for the decreased groove speed. They can apparently increase friction for some reason, at least they did in those tests. I would think that more research is warranted, with a variety of modern styli and with various tracking forces.
Not an argument for using more anti-skating force with 45 rpm records, though.
If it's a single, it could be made of inferior vinyl with greater friction and thus greater skating force.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Which proves that the stylus does not melt the vinyl - Helge Gundersen 13:00:33 04/16/07 (5)
- Re: Which proves that the stylus does not melt the vinyl - John Elison 15:47:20 04/17/07 (0)
- Actually an argum,ent for using less skating force with 45s - Mark Kelly 14:40:14 04/16/07 (2)
- Re: Actually an argum,ent for using less skating force with 45s - Helge Gundersen 23:55:10 04/16/07 (0)
- You have a valid point... - John Elison 19:26:13 04/16/07 (0)
- I'm sure you are correct, Helge. My analysis is based on an unmodulated groove or a blank vinyl surface. (nt) - John Elison 13:24:38 04/16/07 (0)