|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Re: Rega upgrades posted by zoltarcat on September 16, 2006 at 04:31:09:
i think i might have got the one good Deepgroove subplatter you had so going with the Groovetracer is something I would do if I were going to buy these mods first timeout.I just read a good way to get VTA for cheap. Buy the finger nut and move the nut from under the table to top and use that as the VTA adjuster and the finger nut underneath to secure the arm. cheap at about $25 total. I am going to try that instead of adding the Michel adjuster, and before going to the VTAF.
~Slainte,
The OMalley
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- truly - OMalley 05:57:01 09/16/06 (6)
- OMalley that sounds interesting but the finger nut is so thick.... - hukkfinn 11:49:10 09/16/06 (5)
- other way around - OMalley 14:16:39 09/16/06 (4)
- This would be a GREAT trick though, if you could buy a nut that is 2 mm thick. - hukkfinn 05:59:33 09/17/06 (1)
- and I am going to look for one - OMalley 09:06:46 09/17/06 (0)
- Have you tried it? The static height increase is 11mm. - Garth 16:06:39 09/16/06 (1)
- bad trick - OMalley 16:24:26 09/16/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
